Differences

This shows you the differences between two versions of the page.

--- 3dp [2026-05-08 Fri 03:20] – theorytoe
+++ 3dp [2026-06-24 Wed 03:31] (current) – theorytoe
@@ Line 3: / Line 3: @@
 knowledge -> vomit -> wiki
+  * [[3dp:marlin|New Printer Marlin Setup]]
+===== Useful Links =====
+    * [[https://ellis3dp.com/Print-Tuning-Guide/|Ellis' Printer Tuning Guide]]
+    * [[https://docs.vorondesign.com/|Voron Documentation]]
+    * [[https://little-did-i-know.github.io/Gcode/gcode-modifier.html|gcode viewer]]
+    * [[https://blog.rahix.de/design-for-3d-printing/|Design for 3D Printing]]
 ===== Esteps Calib =====
@@ Line 26: / Line 34: @@
 M500                       ; write to EEPROM
 </code>
+===== Marlin UBL =====
+Kinda nice compared to Bilinear, but its poorly explained...
+Firstly, manually level. Next:
+<code>
+G28        ; home
+G29 P1     ; auto probe
+G29 P3     ; interp. pts
+G29 F10.0  ; set fade height to 10mm
+G29 S0     ; save mesh in slot 0
+M500       ; save to EEPROM
+</code>
+Then for start gcode excerpt
+<code>
+G28          ; home all axes
+G29 L0       ; load mesh slot 0 (enables UBL so G29 A is redundant)
+G29 J2       ; 4-pt co-planar mesh align level
+</code>

kyaruc memex